FoundationPartsOperationsSurfaces

Surfaces

Surface operations build zero-thickness sheets; Thicken turns any of them into a solid, Stitch joins several into one.

NodeBuilds
ExtrudedSurface(curve, distance)an open or closed curve pushed along its sketch normal
RevolvedSurface(curve, axis, angle=360)a curve revolved about an axis
RuledSurface(start, end)straight lines between two curves on different sketches
PlanarSurface(shape)the flat face inside a closed shape
SurfaceLoft(shapes)a smooth surface through several sections

Open curves are CustomOpenShapes made of Line, Arc and Spline primitives.

from cadbuildr.foundation import *


class WavePanel(Part):
    """ExtrudedSurface: an open spline pushed 40 mm, thickened to a 2 mm panel."""

    def __init__(self):
        s = Sketch(self.xz())
        wave = CustomOpenShape(
            [
                Spline(
                    [
                        Point(s, 0, 0),
                        Point(s, 10, 6),
                        Point(s, 20, 0),
                        Point(s, 30, -6),
                        Point(s, 40, 0),
                    ]
                )
            ]
        )
        self.add_operation(Thicken(ExtrudedSurface(wave, 40), 2))
        self.translate([-110, 0, 0])
        self.paint("light_blue")


class Bowl(Part):
    """RevolvedSurface: a quarter-circle profile revolved a full turn, thickened."""

    def __init__(self, radius=20):
        s = Sketch(self.xz())
        profile = CustomOpenShape(
            [
                Arc(
                    Point(s, radius, 0),
                    Point(s, radius * 0.7071, -radius * 0.7071),
                    Point(s, 0, -radius),
                )
            ]
        )
        axis = Axis(Line(Point(s, 0, -30), Point(s, 0, 10)))
        self.add_operation(Thicken(RevolvedSurface(profile, axis), 2))
        self.translate([-30, 20, 25])
        self.paint("dark_orange")


class RuledScoop(Part):
    """RuledSurface: straight lines from a flat edge to an arc 30 mm above it."""

    def __init__(self):
        bottom = Sketch(self.xy())
        top = Sketch(self.xy().get_parallel_plane(30))
        edge = CustomOpenShape([Line(Point(bottom, -15, 0), Point(bottom, 15, 0))])
        arc = CustomOpenShape(
            [Arc(Point(top, -15, 0), Point(top, 0, 12), Point(top, 15, 0))]
        )
        self.add_operation(Thicken(RuledSurface(edge, arc), 2))
        self.translate([30, 20, 0])
        self.paint("lime")


class Disc(Part):
    """PlanarSurface: the flat face inside a circle, thickened to a 3 mm disc."""

    def __init__(self):
        s = Sketch(self.xy())
        self.add_operation(Thicken(PlanarSurface(Circle(s.origin, 10)), 3))
        self.translate([80, 20, 0])
        self.paint("light_bluish_gray")


class SurfaceGallery(Assembly):
    def __init__(self):
        for part in (WavePanel(), Bowl(), RuledScoop(), Disc()):
            self.add_component(part)


show(SurfaceGallery())