FoundationPartsSheet MetalCorner Relief

Corner Relief

SheetMetalCornerRelief(body, relief_type, size) cuts a relief wherever two bends off the same flange meet at a corner, so the bends don’t collide and the flat pattern doesn’t tear there.

relief_typeRelief
RECTANGULAR (default)a size × size square centred on the corner
CIRCULAR / OBROUNDa circle of diameter size

The relief is recorded on the parent flange, so it appears in the flat pattern (right) and in the DXF export.

from cadbuildr.foundation import (
    Assembly,
    Line,
    Part,
    Point,
    Rectangle,
    SheetMetalBaseFlange,
    SheetMetalCornerRelief,
    SheetMetalEdgeFlange,
    SheetMetalToSolid,
    Sketch,
    Unfold,
    show,
)
from cadbuildr.foundation.gen.models import CornerReliefType


class _RelievedCorner(Part):
    """Two flanges meeting at a corner, with a round corner relief."""

    def __init__(self, flatten=False, width=60, depth=40, wall=15, thickness=2):
        s = Sketch(self.xy())
        body = SheetMetalBaseFlange(
            profile=Rectangle.from_center_and_sides(s.origin, width, depth),
            thickness=thickness,
        )
        w, h = width / 2, depth / 2
        body = SheetMetalEdgeFlange(
            body=body, edge=Line(Point(s, -w, -h), Point(s, w, -h)), length=wall
        )
        body = SheetMetalEdgeFlange(
            body=body, edge=Line(Point(s, w, -h), Point(s, w, h)), length=wall
        )
        body = SheetMetalCornerRelief(
            body=body, relief_type=CornerReliefType.CIRCULAR, size=8
        )
        if flatten:
            body = Unfold(body=body)
        self.add_operation(SheetMetalToSolid(body=body))
        self.paint("orange" if flatten else "light_blue")


class SheetMetalCornerReliefDemo(Assembly):
    """SheetMetalCornerRelief: folded (left) and flat (right) — the relief hole
    sits where the two bends meet."""

    def __init__(self):
        folded = _RelievedCorner()
        folded.translate([-45, 0, 0])
        self.add_component(folded)
        flat = _RelievedCorner(flatten=True)
        flat.translate([45, 0, 0])
        self.add_component(flat)


show(SheetMetalCornerReliefDemo())